We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Kinco K5 Series PLC
Kinco K5 Series PLC | Anaheim Automation, Inc.
Information
K5 Series provide diverse functions and higher performance, is a cost-effective micro integrated PLC (Programmable Logic Controller). Kinco-K5 CPU provides special I/O functions (high-speed counter, PTO/PWM output), CANopen master, multiple RS485 ports, integrated analog input and output channels an so on. Equiped with diverse extension modules, Kinco-K5 PLC is applicable to fully meet requirements of small devices and process control. Kinco-K5 combined with HMI, servo driver and inverter will provider users with a full easy automation solution.
- provides two high-speed counters with 12 different operation modes
- Supports PTO and PWM upto 200KHz
Featured Series
.png)
.png)
.png)
.png)
.png)
.png)
.png)
KNC-PLC-K541
- Expansion Module, CANopen Communication
- Supports CAN2.0A and CAN2.0B Standard
- Communication Baudrates Ranging from 10K~1Mbps
- Boot-Up Configurable via KincoBuilder
- Supports:
- 72 CANopen Slave Stations
- Network Management (NMT)
- Process Data Objects (PDO)
- Service Data Ojects (SDO)
- Preset Emergency Messages
- Node Protection
- Heartbeat Messages
Show
per page
High-speed Counter
• Kinco-K5 CPU provides two high-speed counters with 12 different operation modes,supports single phase frequency up to 60KHz and dual-phase(A/B phase) frequency up to 20KNz.In different modes,each counter has its own inputs for clock,direction control,start and reset,and has a 32-bit current value and preset value.
High-speed pulse output
• Kinco-K5 CPU has two built-in pulse generators with frequency up to 200KHz,which support PTO(Pulse Train Output)or PWM (Pulse-Width Modulation).KincoBuilder software provides absolute position,relative position,homing,jog and quick stop instructions and so on.Kinco-K5,combining with stepper or servo system,can realize position control conveniently.
CAN bus Cmmunication Funtion
• CPU module can provide CANopen master and free protocol function by connecting with CAN bus module K541.CANOpen master function complies with Standard DS301.It supports baud rate up to 1Mbps,72 CANopen slave stations,up to 256 TPDOs and 256 RPDOs.Connect K5 with CD/FD/JD/ED series servo via CANopen bus can realize multi-axis motion control easily with simple wiring and high reliability.
Serial communication port
•CPU module provides 1 RS232 port and at most 2 RS485 serial communication ports,provides Modbus RTU master/ slave protocol and freeprotocol.Via RS485 ports,Kinco-K5 can work as Modbus RTU slave to connect with HMI,configuration software or other master station devices,as well as work as Modbus RTU master to connect with PLC,inverter,instrument,actuator.Each RS485 port support at most 32 devices to be interconnected into a network.
Edge Interrupt Function
• Kinco-K5 provides edge interrupt,communication poer interrupt,time interrupt,high-speed counter interrupt and so on.Tnterrupt routine run in real time,not affected by PLC cycle.DI points I0.0-I0.3 on CPU body support edge interrupt function.Kinco-K5 can capture rising/falling edge of DI signal quickly.Time base of the two ways time interrupts is 0.1ms,Kinco-K5 can meet applications of precise timing.
Soft-PID Function
• Kinco-K5 provides soft-PID control function by function block(default).User can call at most 4 PID function blocks in program. The PID function block can takeAI signal value as the PV value for PID,meanwhile,send PID output value directly to AO module for output.
Various module types
• Kinco-K5 series PLCs comprise of CPU modules and expansion modules.Kinco-K5 provides about 20 kind of models to meet various applicationgs.CPU modules integrate with a certain number of I/O points on body.If I/O points are not enough for application,user could connect up to 10 expansion modules witn up to 200 points to meet most automation applications.
Integrated DC24V Sensor Supply
• CPU modules provides DC24V power supply (Terminal name:VO+,VO-),with maximum current 300mA or 500mA.It can supply DC24V for the connected text dispaly panel,HMI,as well as DI points.